 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HCC/HCF4048B MULTIFUNCTION EXPANDABLE 8-INPUT GATE .THREE.MANY .QUI .STANDARDI .5V,10V,AND15VPARAMETRI .I .100%TESTEDFORQUI .MEETSALLREQUI STATE OUTPUT LOGIC FUNCTIONS AVAILABLE IN ONE PACKAGE ESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE ZED SYMMETRICAL OUTPUT CHARACTERISTICS C RATINGS NPUT CURRENT OF 100nA AT 18V AND 25C FOR HCC DEVICE ESCENT CURRENT REMENTS OF JEDEC TENTATIVE STANDARD N. 13A, "STANDARD SPECIFICATIONS FOR DESCRIPTION OF "B" SERIES CMOS DEVICES" EY Plastic Package F Ceramic Frit Seal Package M1 Micro Package C1 Plastic Chip Carrier ORDER CODES : HCC4048BF HCF4048BM1 HCF4048BEY HCF4048BC1 PIN CONNECTIONS DESCRIPTION The HCC4048B (extended temperature range) and HCF4048B (intermediate temperature range) are monolithic integrated circuit, available in 16-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4048B is an 8-input gate having four control inputs. Three binary control inputs - Ka, Kb, and Kc - provide the implementation of eight different logic functions. These functions are OR, NOR, AND, NAND, OR/AND, OR/NAND, AND/OR and AND/NOR. A fourth control input-Kdprovides the user with a 3-state output. When control input Kd is high the output is either a logic 1 or a logic 0 depending on the inner states. When control input Kd is low, the output is an open circuit. This feature enables the user to connect this device to a common bus line. In addition to the eight input lines, an EXPAND input is provided that permits the user to increase the number of inputs to one HCC/HCF4048B. For example, two HCC/HCF4048B's can be cascaded to provide a 16-input multifunction gate. When the EXPAND input is not used, it should be connected to VSS. October 1988 1/12 HCC/HCF4048B FUNCTIONAL DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V DD* Vi II Pt ot Parameter Supply Voltage : HC C Types H C F Types Input Voltage DC Input Current (any one input) Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range Operating Temperature : HCC Types H CF Types Storage Temperature Value - 0.5 to + 20 - 0.5 to + 18 - 0.5 to V DD + 0.5 10 200 100 - 55 to + 125 - 40 to + 85 - 65 to + 150 Unit V V V mA mW mW C C C Top Tstg Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltages values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top Parameter Supply Voltage : HC C Types H C F Types Input Voltage Operating Temperature : H CC Types H C F Types Value 3 to 18 3 to 15 0 to V DD - 55 to + 125 - 40 to + 85 Unit V V V C C 2/12 HCC/HCF4048B BASIC LOGIC CONFIGURATIONS LOGIC DIAGRAM FUNCTION TRUTH TABLE Output Function NOR OR OR/AND OR/NAND AND NAND AND/NOR AND/OR Boolean Expression J = A+B+C +D+E+ F +G+H J=A+B+C+D+E+F +G+H J = (A + B + C + D) * (E + F + G + H) J = (A + B + C + D) * (E + F + G + H) J = ABCDEFGH J = ABCDEFGH J = ABCD + EFGH J = ABCD + EFGH Ka 0 0 0 0 1 1 1 1 Kb 0 0 1 1 0 0 1 1 Kc 0 1 0 1 0 1 0 1 Unused Input VS S VS S VS S VS S V DD V DD V DD V DD K d = 1 Normal Inverter Action K d = 0 High Impedance Output EXPAND Input = 0 3/12 HCC/HCF4048B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Symbol IL Parameter Quiescent Current Test Conditions VO |I O | V D D T L o w* (V) (A) (V) Min. Max. 0/ 5 5 0.25 0/10 10 0.5 0/15 15 1 0/20 20 5 0/ 5 5 1 0/10 10 2 0/15 15 4 0/ 5 <1 5 4.95 0/10 <1 10 9.95 0/15 <1 15 14.95 5/0 <1 5 0.05 10/0 <1 10 0.05 15/0 <1 15 0.05 0.5/4.5 < 1 5 3.5 1/9 <1 10 7 1.5/13.5 < 1 15 11 4.5/0.5 < 1 5 1.5 9/1 <1 10 3 13.5/1.5 < 1 15 4 0/ 5 2.5 5 -2 0/ 5 4.6 5 - 0.64 0/10 9.5 10 - 1.6 0/15 13.5 15 - 4.2 0/ 5 2.5 5 - 1.53 0/ 5 4.6 5 - 0.52 0/10 9.5 10 - 1.3 0/15 13.5 15 - 3.6 0/ 5 0.4 5 0.64 0/10 0.5 10 1.6 0/15 1.5 15 4.2 0/ 5 0.4 5 0.52 0/10 0.5 10 1.3 0/15 1.5 15 3.6 VI (V) 18 Any Input 15 0/18 0/15 Any Input 18 15 0.3 0.4 1.0 10-5 0.3 10-4 0.4 10-4 1.0 5 7.5 1 12 7.5 A pF 0.1 Value 25 C Min. Typ. Max. 0.01 0.25 0.01 0.5 0.01 1 0.02 5 0.01 1 0.01 2 0.01 4 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 - 1.6 - 3.2 - 0.51 - 1 - 1.3 - 2.6 - 3.4 - 6.8 - 1.36 - 3.2 - 0.44 - 1 - 1.1 - 2.6 - 3.0 - 6.8 0.51 1 1.3 2.6 3.4 6.8 0.44 1 1.1 2.6 3.0 6.8 10-5 0.01 T Hi g h * Min. Max. 7.5 15 30 150 7.5 15 30 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 - 1.15 - 0.36 - 0.9 - 2.4 - 1.1 - 0.36 - 0.9 - 2.4 0.36 0.9 2.4 0.36 0.9 2.4 1 Unit HCC Types A HCF Types V OH Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Output Drive Current V V OL V V IH V V IL V I OH HCC Types mA HCF Types I OL Output Sink Current HCC Types HCF Types mA I IH , I IL Input Leakage Current 3-state Output Current Input I OH CI HCC 0/18 Types HCF 0/15 Types HCC 0/18 Types HCF 0/15 Types Capacitance A * TLOW = - 55C for HCC device : - 40C for HCF device. * THIGH = - 125C for HCC device : - 85C for HCF device. The Noise Margin for both "1" and "0" level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5V min. with VDD = 15V, 4/12 HCC/HCF4048B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25C, CL = 50pF, R L = 200k, typical temperature coefficient for all V DD = 0.3%/C values, all input rise and fall time = 20ns) Test Conditions Symbol t PHL , t PL H Parameter Propagation Delay Time Inputs to Output and Ka to Output V D D (V) Min. 5 10 15 Kb to Output 5 10 15 Kc to Output 5 10 15 Expand Input to Output 5 10 15 t PHZ , t PL Z t PZ H, t PZ L 3-state Propagation Delay Time Kd to Output R L = 1k 5 10 15 t T HL , t TL H Transition Time 5 10 15 3-state Output Capacitance Value Typ. 300 150 120 225 85 55 140 50 40 190 90 65 80 35 25 100 50 40 5 Max. 600 300 240 450 170 110 280 100 80 380 180 130 160 70 50 200 100 80 10 pF ns Unit Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Characteristics. 5/12 HCC/HCF4048B Typical Output High (source) Current Characteristics. Minimum Output high (source) Current Characteristics. APPLICATIONS OF EXPAND INPUT ACTUAL-CIRCUIT LOGIC CONFIGURATIONS EXPANSION LOGIC AND TRUTH TABLE IMPLEMENTATION OF EXPAND INPUT FOR 9 OR MORE INPUTS OUTPUT FUNCTION NOR OR AND NAND OR/AND OR/NAND AND/NOR AND/OR FUNCTION NEEDEDAT OUTPUT BOOLEAN EXPRESSION EXPANDINPUT OR OR NAND NAND NOR NOR AND AND J = (A+B+C+D+E+F+G+H) + (EXP) J = (A+B+C+D+E+F+G+H) + (EXP) J = (ABCDEFGH) (EXP) J = (ABCDEFGH) (EXP) J = (A+B+C+D) (E+F+G+H) (EXP) J = (A+B+C+D) (E+F+G+H) (EXP) J = (ABCD) + (EFGH) + (EXP) J = (ABCD) + (EFGH) + (EXP) Note :(EXP) designates the EXPAND function (i.e., X1 + X2 + . . XN). 6/12 HCC/HCF4048B APPLICATIONS OF EXPAND INPUT (continued) 12-Input or/and Gate. 16-Input Nor Gate. TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Current. 7/12 HCC/HCF4048B Plastic DIP16 (0.25) MECHANICAL DATA mm MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP. MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 inch TYP. MAX. DIM. P001C 8/12 HCC/HCF4048B Ceramic DIP16/1 MECHANICAL DATA mm MIN. A B D E e3 F G H L M N P Q 7.8 2.29 0.4 1.17 0.22 0.51 0.38 17.78 2.79 0.55 1.52 0.31 1.27 10.3 8.05 5.08 0.307 0.090 0.016 0.046 0.009 0.020 3.3 0.015 0.700 0.110 0.022 0.060 0.012 0.050 0.406 0.317 0.200 TYP. MAX. 20 7 0.130 MIN. inch TYP. MAX. 0.787 0.276 DIM. P053D 9/12 HCC/HCF4048B SO16 (Narrow) MECHANICAL DATA DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm TYP. MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.004 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010 P013H 10/12 HCC/HCF4048B PLCC20 MECHANICAL DATA mm MIN. A B D d1 d2 E e e3 F G M M1 1.27 1.14 7.37 1.27 5.08 0.38 0.101 0.050 0.045 9.78 8.89 4.2 2.54 0.56 8.38 0.290 0.050 0.200 0.015 0.004 TYP. MAX. 10.03 9.04 4.57 MIN. 0.385 0.350 0.165 0.100 0.022 0.330 inch TYP. MAX. 0.395 0.356 0.180 DIM. P027A 11/12 HCC/HCF4048B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 12/12 |
Price & Availability of HCC4048B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |